LT10M Manual Pallet Tilter, LT10E Eelectric Pallet Tilter

Introduction of pallet tilter

LT series lift and tilt pallet jack are designed to lift the pallet and tilt it to the ergonomic angle. LT10M manual pallet tilter & LT10E electric pallet tilter are worked to allow the users to ergonomically reach loads easily without having to bend down or over-stretch. The Electric tilt pallet jack has forced steering on one wheel to make manoeuvring easy. Lift /lower functions are controlled by a switch on the control lever. Tilt/return functions are controlled by a remote control, which is fitted with a long wire, and can make the operator and the tilter with load keep a certain distance, more safer. Lift /lower function and Tilt/return functions can be operated independently of each other or simultaneously. When Tilt/return functions are to be used, the tilter must be on a firm surface, and the universal wheel shall be braked. When Tilt/return functions are to be used to stack materials, the handle can be turned to the side to make access to the stack table easier.

As a pallet tilting equipment, this pallet jack tilter can be used as a pallet truck and also a tilting pallet truck, this can not only improve your work efficiency, but also save costs.

Rokturi var pagriezt un nofiksēt pozīcijā prom no darba zonas. Tas attiecas gan uz sēdus, gan stāvošu stāvokli. Palešu sasvēršanas domkrata dakšiņas var noliekt līdz 90 grādiem. Tie abi tiek piegādāti standartaprīkojumā ar stāvbremzi un kāju aizsargiem.

Atbilst standartiem EN1757-1 un EN1175

Details of pallet tilter

LT0M manual pallet tilter LT10E electric pallet tilter

We have this item in stock in France/US, if you are located in Europe or US, we can arrange delivery to you ASAP! This way will save your time and shipping cost.

Specifications of pallet tilter

i-lifts Nr.		1520902	1520903
Modelis		LT10M	LT10E
Veids		Rokasgrāmata	Elektriski
Jauda	kg (mārciņas)	1000(2200)
Pacelšanas augstums, vertikāls	h mm (collās)	285(11.2)
Min.fork augstums	h1 mm (collās)	85(3.3)
Dakšas garums	I mm (collas)	800(31.5)
Roktura augstums	L1 mm (collās)	1138(44.8)
Kopējais dakšas platums	b mm (collas)	560(22)
Platums starp dakšām	b1 mm (collās)	234(9.2)
Dakšas gala garums no veltņa	L2 mm (collās)	135(5.3)
Kopējais platums	B mm (collās)	638(25.1)
Kopējais garums	L mm (collās)	1325(52.2)	1410(55.5)
Kopējais augums, pacelts	H mm (collās)	950(37.4)
Kopējais augstums, nolaists	H mm (collās)	750(29.5)
Kravas centrs Min./Max.	C1 mm (collās)	200/400(8/16)
Kravas centrs Min./Max.	C2 mm (collās)	200/420(8/16.5)
Barošanas bloks	KW / V	--	0.8/12
Neto svars	kg (mārciņas)	178(391.6)	185(407)

Drošības noteikumi

1. Driving the pallet tilter on the slope

1) The pallet tilter shall be unloaded or a small load.

2) Kravai jābūt zemākajā stāvoklī.

3) The gradient shall be no more than 2° when dragging the pallet tilter.

4) Operatoram jābūt augšējā pozīcijā neatkarīgi no tā, vai paaugstināt vai pazemināt.

2. Avoid offset loads

Krava vienmērīgi jāsadala uz dakšām vai paletēm ar 400 mm attālumu starp smaguma centru un dakšām priekšā, maksimālais smaguma centra augstums ir 420 mm, minimālais ir 200 mm, attālums no šīs jomas samazinās drošība un palielina risku.

Precēm, kas atrodas uz paletēm vai dakšām, jābūt pienācīgi nostiprinātām, jāizvairās no kravas nelīdzsvarotības, lai pārvadāšanas laikā tās varētu nokrist, paceļot kravas mašīnu vai ja kravas mašīna kādu laiku jāpavada.

3. Driving loaded

The tilting pallet jack is designed for use on even and level floor. During transport the forks shall be raised as little as possible. Transport with raised forks should be made over the shortest possible distances and at low speed. Do not transport when tilting goods on the pallet tilter, this is not safe.

Brīdinājums: Nekad nelieciet rokas vai kājas uz kustīgajām daļām, jo tas var radīt ievainojumus.